| GENERAL SPECIFICATIONS FOR MODEL 'GS' GRAPPLE |
| Max. opening, ground to teeth |
74-1/2" |
| Number of Teeth available |
5 |
| Tooth thickness and material |
5/8" T-1 (100,000 psi yield) steel |
| Teeth replaceable?: |
Yes, each tooth secured by (2) 3/4" Gr. 8 bolts |
| Max. Primary Clamping force at tips of teeth with 3250 psi |
2,500 lb. |
| Max. Secondary Clamping force at tips of teeth with 3250 psi |
2,600 lb. |
| Grapple opening time with 15GPM |
1.6 sec. (flow to cylinders is not restricted) |
| Bore and stroke of cylinders |
2.00 inch bore and 10.75" stroke |
| Maximum recommended operating pressure |
3,500 psi |
| Diameter of main grapple pivot pins |
1.25" |
| Diameter of cylinder pivot pins and pivot link |
1.00" |
| General type of steel used for grapple construction |
50-100,000 psi yield alloy steel |
| Total weight of Grapply and bucket with optional Bolt-on edge |
1280 lb. |
| Weight of grapple, bucket, optional bolt-on edge (separately) |
460 lb. grapple, 700 lb. bucket, 120 lb. bolt-on edge |
| Width of bucket inside/outside |
72 inches / 74 inches |
| Volume of bucket, struck/heaped |
25 cubic feet / 28 cubic feet |
| Limited Warranty on Grapple material and workmanship |
1 year or 2,000 hours, whichever comes first |
