 |
| |
 |
The cylinders feature dual cast-iron piston rings, threaded gland retention and heavy-duty seals for long life. The custom long-stroke cylinders are designed for 4000 psi operating pressure. |
 |
The bucket body and endplates are made from 1/4” thick steel...not 3/16 or less, like many other brands. |
 |
The permanent cutting edge is 3/4 x 6 and the optional reversible bolt-on edge is 3/4 x 8. |
 |
A raised step-plate makes machine entry/exit easier and protects the hydraulic hoses. |
 |
The T-1 steel teeth are designed with the proper curvature to maximize material grab and hold. |
 |
Massive 1-1/4” diameter main pivot pins with internal greaseways make pin problems a thing of the past. The cylinder pins and front secondary pivot are 1" diameter. |
 |
The revolutionary guide "V" and double stop system allows the grapple to maintain a wide opening during the closing cycle. The end of the closing cycle is completed by a powerful pull motion that clamps the load in place. |
 |
The latest design technology was used for the development and preliminary testing of each grapple component. |
